THE SCIENTIFIC JOURNAL
Getting a dental implant, step by step: from the first consultation to the crown and beyond
QUICK ANSWER
A dental implant is a sequence of stages rather than a single appointment: checking whether your tooth can be kept, a 3D scan, a plan built around the finished crown, placing the implant, healing while it bonds to the bone, fitting the crown, and regular maintenance. How long it takes depends on your healing, the bone available and the protocol chosen, and in people missing some of their teeth, a systematic review found implant survival of 96% to 100% across the main placement and loading protocols.[1] Our periodontist places the implant to the plan he, the team and I make together around the finished crown, and I make the crown and stay with you for every review after it.
First, can the tooth be kept?
Every implant conversation in my practice begins with the same question: can the tooth you already have be saved? A natural tooth, with its own root and the ligament that cushions it, is worth keeping whenever the outlook is reasonable. I go through this with you before an implant is even discussed, and Can my tooth be saved? explains how that decision is weighed.
If the tooth cannot be kept, or is already missing, here is the road from there, stage by stage, with who does each part.
The dental implant process, step by step
- 1
Whole-mouth assessment
Dr. Khalid checks first whether the tooth can be kept, then your gums, bite and health history.
- 2
3D scan and one joint plan
Dr. Khalid, our periodontist and the team read the CBCT scan together and plan the case before anything is booked.
- 3
The finished tooth, designed first
The plan sets where the crown will sit and how it will meet your bite, and that design becomes the brief for the surgery.
- 4
Bone graft or sinus lift, if the plan needs one
Our periodontist rebuilds the bone where the scan shows it is too thin or too short.
- 5
Placing the implant
Our periodontist places the implant in the position the finished crown needs.
- 6
Healing
The implant bonds to the bone and the gum is shaped around it, while Dr. Khalid and our periodontist follow the healing together.
- 7
The crown
Dr. Khalid makes and fits the crown, then checks the bite and the fit at the gum line.
- 8
Reviews and maintenance
Dr. Khalid runs your regular reviews and cleanings, with our periodontist, for as long as you have the implant.
Planning: the 3D scan, and the finished tooth designed first
Before anything is booked, our periodontist, the team and I plan your case together from the same charts, X-rays and scan, so no step is missed and the finished result meets the standards of function, aesthetics and biomimetics. Our periodontist is the implant surgeon in the same clinic, and we do this face to face, with your scan on the screen between us.
The scan is a cone-beam CT (CBCT), a 3D X-ray that shows the width and height of the bone, the nerve in the lower jaw, the sinus above the upper back teeth and the roots of the neighbouring teeth. A systematic review of CBCT in implant dentistry found that radiation doses vary almost a hundredfold between machines, and that limiting the scan to the area being planned lowers the dose considerably.[2]
Then comes the step that shapes everything after it: the finished tooth is designed first. Within that joint plan, we decide where the crown sits in the arch, how it emerges from the gum and how it meets the teeth opposite, and that design becomes the brief the implant is placed to. Put simply, the surgery is planned to the finished tooth, rather than the tooth fitted to whatever the surgery leaves.
Here, the plan made on the scan is carried into the mouth with a surgical guide printed from it. Across 2,238 implants placed this way, the average difference between the planned and the final position was 1.2 mm at the entry point and 1.4 mm at the tip, which a meta-analysis judged clinically acceptable in most situations, advising a safety margin of at least 2 mm.[3] That is why the position is chosen with room to spare around the nerve, the sinus and the neighbouring roots.
Placing the implant, and why healing times vary
Our periodontist places the implant, the small post in the bone that many people call the screw, in the position agreed for the crown, together with any bone graft or sinus lift the plan calls for. If the bone is too narrow or too short, it may be rebuilt first, and bone grafting explains the difference between a small graft added during placement and a separate procedure months before. I stay on the case through this stage: we go over the plan together before the day, and we review the healing together afterwards.
There is no single timeline, and I would rather not quote one before your scan has been read. Two choices shape it most. The first is when the implant goes in: into the socket at the extraction, or once the site has healed (immediate implants explains when the first is possible). The second is when the implant starts to carry a tooth: straight away, early, or after a longer healing period. Survival is high across these combinations, and the loading protocol appears to influence how immediate placement turns out.[1] Which one suits you depends on your bone, your bite, your general health and how firmly the implant is held when it goes in.
While it heals, the implant bonds with the bone, the process dentists call osseointegration. The gum is then shaped around it with a small healing cap, sometimes called a gum former, so the crown can emerge naturally; depending on the protocol, the cap goes on at the surgery or at a short visit later.
The crown: where the restorative work shows
This is my part of the work, and it carries more weight than many people expect. Once the implant is ready, I record its position, make the crown to the design set in our plan, and check how it meets your other teeth when you bite and chew.
One detail matters a great deal for the years ahead, and it sits at the gum line. The crown has to be shaped so the area around it can be cleaned, and nothing can be left trapped beneath the gum. In one clinical study of implants with inflamed tissue around them, excess cement was found in 81% of cases, and a month after it was removed, the signs of inflammation had gone from 74% of the implants.[4] That detail belongs to the restorative stage: the shape of the crown, the way it is fixed and the check that nothing has been left behind. Here, implant crowns are usually screwed onto the implant rather than cemented, so there is no cement to leave under the gum.
After the crown: care for the years ahead
An implant cannot decay, but the gum and bone around it can become inflamed: this is called mucositis while only the gum is involved, and peri-implantitis once the inflammation begins to take bone. A meta-analysis of maintenance programmes concluded that implant treatment should not end with placing and restoring the implant. It suggested reviews at least every 5 to 6 months, tailored to each person's risk, and noted that problems can still occur even with maintenance.[5]
So the implant joins your regular visits, with reviews and cleanings that I run with our periodontist. At home, clean around it every day as carefully as around your own teeth, between the teeth included, and if the gum bleeds or swells, or the crown feels loose, book a visit before your next review.
One plan, shared by everyone who carries it out, is how our team plans a case together. If you are still deciding whether an implant is right for you, dental implants compares it with keeping the tooth and with a bridge. Either way, the first step is simply a conversation and an examination, and everything after it is planned with you.
COMMON QUESTIONS